Specifications

3-98
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.65 REPT EVT ENV: Report Event Environment
Reports the occurrence of a non-alarmed event against an environment alarm input.
Section REPT EVT ENV Description
Category Environmental Alarms and Controls
Security Retrieve
Related
Messages
OPR-EXT-CONT RTRV-ATTR-ENV
REPT ALM ENV RTRV-COND-ENV
RLS-EXT-CONT RTRV-EXT-CONT
RTRV-ALM-ENV SET-ATTR-CONT
RTRV-ATTR-CONT SET-ATTR-ENV
Output Format SID DATE TIME
A ATAG REPT EVT ENV
“<AID>:<ALMTYPE>,[<CONDEFF>],,,,,,,:[<DESC>]”
;
where:
• <AID> identifies an environmental input and is from the “ENV” section on
page 4-10
• <ALMTYPE> is an abbreviated code identifying the alarm and the valid values
are shown in the “ENV_ALM” section on page 4-36
• <CONDEFF> indicates an effect of the condition on the NE; valid values for
<CONDEFF> are shown in the “COND_EFF” section on page 4-24,
<CONDEFF> is optional
• <DESC> is an alarm message; <DESC> is a string and is optional
Output
Example
TID-000 1998-06-20 14:30:00
A 001 REPT EVT ENV
“ENV-IN-2:OPENDR,TC,,,,,,,:\“OPEN DOOR\””
;