Specifications

3-97
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.64 REPT EVT COM: Report Event COM
Reports a non-alarmed event against an NE when there is no AID associated with it.
Section REPT EVT COM Description
Category Fault
Security Retrieve
Related
Messages
REPT ALM <MOD2ALM> RTRV-ALM-ENV
RTRV-COND-<MOD2ALM> RTRV-ALM-EQPT
REPT ALM BITS RTRV-ALM-RING
REPT ALM COM RTRV-ALM-SYNCN
REPT ALM ENV RTRV-COND-ALL
REPT ALM EQPT RTRV-COND-BITS
REPT ALM RING RTRV-COND-ENV
REPT ALM SYNCN RTRV-COND-EQPT
RTRV-ALM-<MOD2ALM> RTRV-COND-RING
RTRV-ALM-ALL RTRV-COND-SYNCN
RTRV-ALM-BITS
Output Format SID DATE TIME
A ATAG REPT EVT COM
“[<AID>]:<CONDTYPE>,[<CONDEFF>],,,,,,,:[<DESC>]”
;
where:
<AID> indicates this event is from the NE. <AID> is a string and is optional.
<CONDTYPE> indicates an event condition type. Valid values are shown in the
“CONDITION” section on page 4-24
<CONDEFF> indicates an effect of the condition on the NE; valid values for
<CONDEFF> are shown in the “COND_EFF” section on page 4-24,
<CONDEFF> is optional
<DESC> is the description message for the condition; <DESC> is a string and is
optional
Output
Example
TID-000 1998-06-20 14:30:00
A 001 REPT EVT COM
“COM:CLDRESTART,TC,,,,,,,:\“COLD RESTART\”,”
;