Specifications

3-95
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.62 REPT EVT <MOD2ALM>: Report Event (DS1, E100, E1000, EC1, G1000, OC3,
OC12, OC48, OC192, STS1, STS3C, STS6C, STS9C, STS12C, STS24C, STS48C,
STS192C, T1, T3, VT1)
(DS1, E1000, EC1, OC192, STS192C supported for ONS 15454 only)
Reports the occurrence of a non-alarmed event.
Section REPT EVT <MOD2ALM> Description
Category Fault
Security Retrieve
Related
Messages
—
Output Format SID DATE TIME
A ATAG REPT EVT <MOD2ALM>
“<AID>:<CONDTYPE>,[<CONDEFF>],,,[<LOCN>],,[<MONVAL>],
[<THLEV>],[<TMPER>]:[<DESC>],[<AIDDET>]”
;
where:
• <AID> indicates an event with the condition type and is from the “ALL” section
on page 4-5
• <CONDTYPE> indicates an event with the condition type and is a string
• <CONDEFF> is the effect of the condition on the NE; valid values for
<CONDEFF> are shown in the “COND_EFF” section on page 4-24,
<CONDEFF> is optional
• <LOCN> indicates the location; valid values for <LOCN> are shown in the
“LOCATION” section on page 4-42, <LOCN> is optional
• <MONVAL> is the monitored value; <MONVAL> is an integer and is optional
• <THLEV> is the threshold value; <THLEV> is an integer and is optional
• <TMPER> is the accumulation time period for the PM information; valid values
for <TMPER> are shown in the “TMPER” section on page 4-63
• <DESC> is the condition description; <DESC> is a string and is optional
• <AIDDET> specifies the type of AID; valid values for <AIDDET> are shown
in the “EQPT_TYPE” section on page 4-38, <AIDDET> is optional
Output
Example
TID-000 1998-06-20 14:30:00
A 001 REPT EVT OC48
“FAC-5-1:WKSWPR,TC,,,FEND,,12,13,15-MIN:\“WORKING SWITCH TO
PROTECTION\”,OC48”
;