Specifications

3-94
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.61 REPT DBCHG: Report Change
Reports any changes on the NE that result from:
1. TL1 provisioning commands or their GUI equivalents containing the verbs: ALW, DLT, ED, ENT,
INH, INIT, OPR, RLS, SET, and SW (for example, DLT-EQPT,ENT-CRS-STS1)
2. External event such as a board insertion.
Section REPT DBCHG Description
Category Log
Security Retrieve
Related
Messages
ALW-MSG-DBCHG
INH-MSG-DBCHG
RTRV-LOG
Output Format SID DATE TIME
A ATAG REPT DBCHG
“TIME=<TIME>,DATE=<DATE>,[SOURCE=<SOURCE>,]
[USERID=<USERID>,]DBCHGSEQ=<DBCHGSEQ>:<COMMAND>:<AID>”
;
where:
• <TIME> is the time of the message triggered by the NE; <TIME> is a time.
• <DATE> is the date of the message triggered by the NE; <DATE> is a date.
• <SOURCE> is an input command CTAG if present; <SOURCE> is an integer
and is optional.
• <USERID> is the user name or user identifier; <USERID> is a string and is
optional.
• <DBCHGSEQ> is a sequential number of the DBCHG message; <DBCHGSEQ>
is an integer.
• <COMMAND> is the input command or substitute; <COMMAND> is a string.
• <AID> is the AID(s) or substitute; <AID> is a string.
Output
Example
TID-000 1998-06-20 14:30:00
A 001 REPT DBCHG
“TIME=14-35-46,DATE=99-07-28,SOURCE=123,USERID=CISCO15,
DBCHGSEQ=456:ENT-CRS-VT1:VT1-4-2-6-4”
;