Specifications

3-93
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.60 REPT ALM SYNCN: Report Alarm Synchronization
Reports an alarm condition against a synchronization reference.
Section REPT ALM SYNCN Description
Category Synchronization
Security Retrieve
Related
Messages
ED-BITS RTRV-ALM-BITS
ED-NE-SYNCN RTRV-ALM-ENV
ED-SYNCN RTRV-ALM-EQPT
OPR-SYNCNSW RTRV-ALM-RING
REPT ALM <MOD2ALM> RTRV-ALM-SYNCN
REPT ALM BITS RTRV-BITS
REPT ALM COM RTRV-COND-<MOD2ALM>
REPT ALM ENV RTRV-COND-ALL
REPT ALM EQPT RTRV-COND-BITS
REPT ALM RING RTRV-COND-ENV
REPT EVT BITS RTRV-COND-EQPT
REPT EVT COM RTRV-COND-RING
REPT EVT SYNCN RTRV-COND-SYNCN
RLS-SYNCNSW RTRV-NE-SYNC
RTRV-ALM-<MOD2ALM> RTRV-SYNCN
RTRV-ALM-ALL
Output Format SID DATE TIME
** ATAG REPT ALM SYNCN
“<AID>:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,,,,:[<DESC>]”
;
where:
• <AID> identifies a synchronization reference with alarm condition and is from
the “SYNC_REF” section on page 4-15
• <NTFCNCDE> indicates a 2-letter notification code; valid values for
<NTFCNCDE> are shown in the “NOTIF_CODE” section on page 4-49
• <CONDTYPE> indicates an alarm condition; valid values for <CONDTYPE>
are shown in the “CONDITION” section on page 4-24
• <SRVEFF> is the effect on service caused by the alarm condition; valid values
for <SRVEFF> are shown in the “SERV_EFF” section on page 4-56
• <DESC> is the condition description; <DESC> is a string and is optional
Output
Example
TID-000 1998-06-20 14:30:00
** 001 REPT ALM SYNCN
“SYNC-NE:MJ,MAN,SA,,,,:\“MANUAL SWITCH\”,”
;