Specifications

3-92
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.59 REPT ALM RING: Report Alarm Ring
Reports an alarm condition against a ring object for BLSR.
Section REPT ALM RING Description
Category BLSR
Security Retrieve
Related
Messages
ED-BLSR RTRV-ALM-ENV
REPT ALM <MOD2ALM> RTRV-ALM-EQPT
REPT ALM BITS RTRV-ALM-RING
REPT ALM COM RTRV-ALM-SYNCN
REPT ALM ENV RTRV-BLSR
REPT ALM EQPT RTRV-COND-<MOD2ALM>
REPT ALM SYNCN RTRV-COND-ALL
REPT EVT COM RTRV-COND-BITS
REPT EVT RING RTRV-COND-ENV
RTRV-ALM-<MOD2ALM> RTRV-COND-EQPT
RTRV-ALM-ALL RTRV-COND-RING
RTRV-ALM-BITS RTRV-COND-SYNCN
Output Format SID DATE TIME
** ATAG REPT ALM RING
“<AID>:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,,,,:[<DESC>]”
;
where:
• <AID> identifies a BLSR ID with alarm condition; <AID> is a string.
• <NTFCNCDE> indicates a 2-letter notification code; valid values for
<NTFCNCDE> are shown in the “NOTIF_CODE” section on page 4-49
• <CONDTYPE> indicates a BLSR alarm; valid values for <CONDTYPE> are
shown in the “CONDITION” section on page 4-24
• <SRVEFF> is the effect on service caused by the alarm condition; valid values
for <SRVEFF> are shown in the “SERV_EFF” section on page 4-56
• <DESC> is the condition description; <DESC> is a string and is optional
Output
Example
TID-000 1998-06-20 14:30:00
** 001 REPT ALM RING
“RING-999:MJ,PRC-DUPID,SA,,,,:\“DUPLICATE NODE ID\”,”
;