Specifications

3-91
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.58 REPT ALM EQPT: Report Alarm Equipment
Reports an alarm condition against an equipment unit or slot.
Section REPT ALM EQPT Description
Category Equipment
Security Retrieve
Related
Messages
ALW-SWDX-EQPT RTRV-ALM-ALL
ALW-SWTOPROTN-EQPT RTRV-ALM-BITS
ALW-SWTOWKG-EQPT RTRV-ALM-ENV
DLT-EQPT RTRV-ALM-EQPT
ED-EQPT RTRV-ALM-RING
ENT-EQPT RTRV-ALM-SYNCN
INH-SWDX-EQPT RTRV-COND-<MOD2ALM>
INH-SWTOPROTN-EQPT RTRV-COND-ALL
INH-SWTOWKG-EQPT RTRV-COND-BITS
REPT ALM <MOD2ALM> RTRV-COND-ENV
REPT ALM BITS RTRV-COND-EQPT
REPT ALM COM RTRV-COND-RING
REPT ALM ENV RTRV-COND-SYNCN
REPT ALM RING RTRV-EQPT
REPT ALM SYNCN SW-DX-EQPT
REPT EVT COM SW-TOPROTN-EQPT
REPT EVT EQPT SW-TOWKG-EQPT
RTRV-ALM-<MOD2ALM>
Output Format SID DATE TIME
** ATAG REPT ALM EQPT
“<AID>:<NTFCNCDE>,<CONDITION>,<SRVEFF>,,,,:[<DESC>],
[<AIDDET>]”
;
where:
• <AID> is the equipment AID SLOT-{1-17} from the “EQPT” section on
page 4-11
• <NTFCNCDE> is the notification code; valid values for <NTFCNCDE> are
shown in the “NOTIF_CODE” section on page 4-49
• <CONDITION> is the type of alarm condition; valid values for <CONDTYPE>
are shown in the “CONDITION” section on page 4-24
• <SRVEFF> is the effect on service caused by the alarm condition; valid values
for <SRVEFF> are shown in the “SERV_EFF” section on page 4-56
• <DESC> is the condition description; <DESC> is a string and is optional
• <AIDDET> specifies the type of AID; valid values for <AIDDET> are shown
in the “EQPT_TYPE” section on page 4-38, <AIDDET> is optional
Output
Example
TID-000 1998-06-20 14:30:00
** 001 REPT ALM EQPT
“SLOT-7:MJ,CONTR,NSA,,,,:\“CONTROLLER FAILURE\”,TCC”
;