Specifications

3-90
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.57 REPT ALM ENV: Report Alarm Environment
Reports a customer-defined condition on an environmental alarm input.
Section REPT ALM ENV Description
Category Environmental Alarms and Controls
Security Retrieve
Related
Messages
OPR-EXT-CONT RTRV-ALM-RING
REPT ALM <MOD2ALM> RTRV-ALM-SYNCN
REPT ALM BITS RTRV-ATTR-CONT
REPT ALM COM RTRV-ATTR-ENV
REPT ALM EQPT RTRV-COND-<MOD2ALM>
REPT ALM RING RTRV-COND-ALL
REPT ALM SYNCN RTRV-COND-BITS
REPT EVT ENV RTRV-COND-ENV
RLS-EXT-CONT RTRV-COND-EQPT
RTRV-ALM-<MOD2ALM> RTRV-COND-RING
RTRV-ALM-ALL RTRV-COND-SYNCN
RTRV-ALM-BITS RTRV-EXT-CONT
RTRV-ALM-ENV SET-ATTR-CONT
RTRV-ALM-EQPT SET-ATTR-ENV
Output Format SID DATE TIME
** ATAG REPT ALM ENV
“<AID>:<NTFCNCDE>,<ALMTYPE>,,,[<DESC>]”
;
where:
• <AID> identifies an environmental input and is from the “ENV” section on
page 4-10
• <NTFCNCDE> identifies a 2-letter notification code; valid values for
<NTFCNCDE> are shown in the “NOTIF_CODE” section on page 4-49
• <ALMTYPE> abbreviated code identifying the alarm; valid values for
<ALMTYPE> are shown in the “ENV_ALM” section on page 4-36
• <DESC> is the alarm message; <DESC> is a string and is optional
Output
Example
TID-000 1998-06-20 14:30:00
** 001 REPT ALM ENV
“ENV-IN-1:MJ,OPENDR,,,\“OPEN DOOR\””
;