Specifications

3-87
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.54 REPT ALM <MOD2ALM>: Report Alarm (DS1, E100, E1000, EC1, G1000,
OC3, OC12, OC48, OC192, STS1, STS3C, STS6C, STS9C, STS12C, STS24C, STS48C,
STS192C, T1, T3, VT1)
(DS1, E1000, EC1, OC192, STS192C supported for ONS 15454 only)
Reports an alarm condition against a facility or a path.
Section REPT ALM <MOD2ALM> Description
Category Fault
Security Retrieve
Related
Messages
REPT ALM BITS RTRV-ALM-EQPT
REPT ALM COM RTRV-ALM-RING
REPT ALM ENV RTRV-ALM-SYNCN
REPT ALM EQPT RTRV-COND-<MOD2ALM>
REPT ALM RING RTRV-COND-ALL
REPT ALM SYNCN RTRV-COND-BITS
REPT EVT COM RTRV-COND-ENV
RTRV-ALM-<MOD2ALM> RTRV-COND-EQPT
RTRV-ALM-ALL RTRV-COND-RING
RTRV-ALM-BITS RTRV-COND-SYNCN
RTRV-ALM-ENV
Output Format SID DATE TIME
** ATAG REPT ALM <MOD2ALM>
“<AID>:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,,,,:[<DESC>],
[<AIDDET>]”
;
where:
• <AID> is the access identifier from the “ALL” section on page 4-5
• <NTFCNCDE> indicates a 2-letter notification code; valid values for
<NTFCNCDE> are shown in the “NOTIF_CODE” section on page 4-49
• <CONDTYPE> indicates an alarm condition; valid values for <CONDTYPE>
are shown in the “CONDITION” section on page 4-24
• <SRVEFF> is the effect on service caused by the alarm condition; valid values
for <SRVEFF> are shown in the “SERV_EFF” section on page 4-56
• <DESC> is the condition description; <DESC> is a string and is optional
• <AIDDET> specifies the AID type; valid values for <AIDDET> are shown in the
“EQPT_TYPE” section on page 4-38, <AIDDET> is optional
Output
Example
TID-000 1998-06-20 14:30:00
** 001 REPT ALM DS1
“FAC-2-1:MJ,LOS,SA,,,,:\“LOSS OF SIGNAL\”,OC12”
;