Specifications

3-79
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.46 INIT-REG-<MOD2>: Initialize Register (DS1, EC1, OC3, OC12, OC48, OC192,
STS1, STS3C, STS6C, STS9C, STS12C, STS24C, STS48C, STS192C, T1, T3, VT1)
(DS1, EC1, OC192 and STS192C supported for ONS 15454 only)
This command initializes the performance monitoring (PM) registers.
Notes:
1. The time period is always the current time period, and the previous time period counts are not
cleared; therefore, both <MONDAT> and <MONTM> are not supported in this command.
Input Format INH-SWTOWKG-EQPT:[<TID>]:<AID>:<CTAG>[::<DIRN>];
where:
• <AID> This parameter can either be the protection unit for which switching back
to working is inhibited (lock-on) or the working unit for which carrying traffic is
to be inhibited (lockout); <AID> is from the “EQPT” section on page 4-11
• <DIRN> is the direction of the switching. The command only supports one value
of the <DIRN> parameter - BTH. This parameter defaults to BTH; valid values
for <DIRN> are shown in the DIRECTION, page 35
Input Example INH-SWTOWKG-EQPT:CISCO:SLOT-2:123::BTH;
Errors This message generates all the default errors
Section INH-SWTOWKG-EQPT Description (continued)
Section INIT-REG-<MOD2> Description
Category Performance
Security Maintenance
Related
Messages
RTRV-PM-<MOD2>
RTRV-PMMODE-<STS_PATH>
RTRV-TH-<MOD2>
SET-PMMODE-<STS_PATH>
SET-TH-<MOD2>