Specifications

3-72
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.39 ENT-USER-SECU: Enter User Security
This command adds a user account. Only a Superuser can do this. Each user is configured as being at
one of these four privilege levels:
1. Retrieve [RTRV]: Users possessing this security level can retrieve information from the node, but
cannot modify anything. The idle time for Retrieve is unlimited.
2. Maintenance [MAINT]: Users possessing this security level can retrieve information from the node
and perform limited maintenance operations such as card resets, Manual/Force/Lockout on
cross-connects or in protection groups, and BLSR ring maintenance. The idle time for Maintenance
is 60 minutes.
3. Provisioning [PROV]: Users possessing this security level can perform all maintenance actions, and
all provisioning actions except those restricted to superusers. The idle time for Provisioning is 30
minutes.
4. Superuser [SUPER]: Users possessing this security level can perform all PROV user actions, plus
creating/deleting user security profiles, setting basic system parameters such as time/date, node
name, and IP address, doing database backup & restore. The idle time for Superuser is 15 minutes.
Notes:
1. The <UID> can be any combination of up to 10 alphanumeric characters.
2. The <PID> is a string of up to 10 characters where at least 2 characters are non-alphabetic with at
least one special character (*, %, or #).
3. Although the CTC allows both <UID> and <PID> of up to 20 characters, the CTC-entered users
(<UID> and <PID>) may not be valid TL1 users.
Input Format ENT-FFP-<OCN_TYPE>:[<TID>]:<WORK>,<PROTECT>:<CTAG>:::
[PROTID=<PROTID>,][RVRTV=<RVRTV>,][RVTM=<RVTM>,]
[PSDIRN=<PSDIRN>][:];
where:
• <WORK> identifies a working port and is the AID from the “FACILITY” section
on page 4-11
• <PROTECT> identifies a protection port and is the AID from the “FACILITY”
section on page 4-11
• <PROTID> is the protection group identifier (protection group name);
<PROTID> defaults to the protecting port of the protection group, it is a string
and can have a maximum length of 32 characters. <PROTID> is a string.
• <RVRTV> identifies the revertive mode and defaults to N (non-revertive mode);
valid values for <RVRTV> are shown in the “ON_OFF” section on page 4-51
• <RVTM> identifies the revertive time and defaults to 5.0 minutes; valid values
for <RVTM> are shown in the “REVERTIVE_TIME” section on page 4-55
• <PSDIRN> identifies the switching mode and defaults to UNI; valid values for
<PSDIRN> are shown in the “UNI_BI” section on page 4-64
Input Example ENT-FFP-OC3:PETALUMA:FAC-2-1,FAC-1-1:1:::PROTID=PROT_NAME,
RVRTV=Y,RVTM=1.0,PSDIRN=BI;
Errors This message generates all the default errors
Section ENT-FFP-<OCN_TYPE> Description (continued)