Specifications

3-71
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.38 ENT-FFP-<OCN_TYPE>: Enter Facilities Protection Group (OC3, OC12,
OC48, OC192)
(OC192 supported for ONS 15454 only)
This command creates an optical 1+1 protection.
Notes:
1. Protect AID must not be provisioned with traffic.
2. Work AID can be provisioned with traffic.
3. PROTID is a string and can have a maximum length of 32 characters.
Input Format ENT-EQPT:[<TID>]:<AID>:<CTAG>::[<AIDTYPE>]:[PROTID=<PROTID>,]
[PRTYPE=<PRTYPE>,][RVRTV=<RVRTV>,][RVTM=<RVTM>][:];
where:
• <AID> is the access identifier from the “EQPT” section on page 4-11
• <AIDTYPE> is the AID card type; valid values for <AIDTYPE> are shown in
the “EQUIPMENT_TYPE” section on page 4-40
• <PROTID> is the protecting card slot identifier of the protection group and is
the AID from the “PRSLOT” section on page 4-8
• <PRTYPE> is the protection group type; valid values for <PRTYPE> are shown
in the “PROTECTION_GROUP” section on page 4-53
• <RVRTV> is the revertive mode; valid values for <RVRTV> are shown in the
“ON_OFF” section on page 4-51
• <RVTM> is the revertive time; valid values for <RVTM> are shown in the
“REVERTIVE_TIME” section on page 4-55
Example Input
ENT-EQPT:PETALUMA:SLOT-12:118::DS1:PROTID=SLOT-13,PRTYPE=1-1,
RVRTV=Y,RVTM=8.5:;
Errors This message generates all the default errors
Section ENT-EQPT Description (continued)
Section ENT-FFP-<OCN_TYPE> Description
Category SONET Line Protection
Security Provisioning
Related
Messages
DLT-FFP-<OCN_TYPE>
ED-FFP-<OCN_TYPE>
EX-SW-<OCN_BLSR>
OPR-PROTNSW-<OCN_TYPE>
RLS-PROTNSW-<OCN_TYPE>
RTRV-FFP-<OCN_TYPE>