Specifications

3-58
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.28 ED-NE-SYNCN: Edit Network Element Synchronization
This command edits the synchronization attributes of the NE.
Notes:
1. Although mixed mode timing is supported in this release, it is not recommended. See the “Mixed
Mode Timing Support” section on page 1-7 for more information.
2. The existing external and line modes have the same functionality in all ONS 15454 3.x releases:
External mode: the node derives its timing from the BITS inputs.
Line mode: the node derives its timing from the SONET line(s).
Mixed mode: the node derives its timing from the BITS input or SONET lines.
Section ED-NE-SYNCN Description
Category Synchronization
Security Provisioning
Related
Messages
ALW-MSG-ALL RTRV-ALM-BITS
ED-BITS RTRV-ALM-SYNCN
ED-DAT RTRV-BITS
ED-NE-GEN RTRV-COND-BITS
ED-SYNCN RTRV-COND-SYNCN
INH-MSG-ALL RTRV-HDR
INIT-SYS RTRV-INV
OPR-SYNCNSW RTRV-NE-GEN
REPT ALM BITS RTRV-NE-IPMAP
REPT ALM SYNCN RTRV-NE-SYNCN
REPT EVT BITS RTRV-SYNCN
REPT EVT SYNCN RTRV-TOD
RLS-SYNCNSW SET-TOD
Input Format ED-NE-SYNCN:[<TID>]::<CTAG>:::[TMMD=<TMMD>,]
[SSMGEN=<SSMGEN>,][QRES=<QRES>,][RVRTV=<RVRTV>,]
[RVTM=<RVTM>];
where:
• <TMMD> is the timing mode; valid values for <TMMD> are shown in the
“TIMING_MODE” section on page 4-63. A null value is equivalent to ALL.
• <SSMGEN> is the SSM message set; valid values for <SSMGEN> are shown
in the “SYNC_GENERATION” section on page 4-60. A null value is equivalent
to ALL.
• <QRES> is the quality of the RES; valid values for <QRES> are shown in the
“SYNC_QUALITY_LEVEL” section on page 4-61. A null value is equivalent
to ALL.
• <RVRTV> is the revertive mode; valid values for <RVRTV> are shown in the
“ON_OFF” section on page 4-51. A null value is equivalent to ALL.
• <RVTM> is the revertive time; valid values for <RVTM> are shown in the
“REVERTIVE_TIME” section on page 4-55. A null value is equivalent to ALL.