Specifications

5-2
Cisco Unified IP Phone Services Application Development Notes
OL-22505-01
Chapter 5 Internal URI Features
Device Control URIs
Device Control URIs
These sections describe the device control URIs:
• Key
• Display
Unicast RTP
5
Multicast RTP
Display
Vibrate
Notify
6
SendDigits
6
Application
6
Device
1. Key:Info, Key:Services, Key:Directories, Key:Settings, Key:AppMenu, and Key:Hold are not supported by 9971, 9951, and 8961 models.
2. Only Init:CallHistory is supported. Does not support Init:Servies, Init:Messages, and Init:Directory.
3. 7905G and 7912G supports only Dial:N format.
4. 7921G and 7925G, and 7926G supports only the Dial:N format.
5. Only supports one incoming and one outgoing unicast stream and does not support the Volume parameter for RTP Receive streams.
6. Requires Cisco Unified IP Phone firmware version 8.3(2) or later, which contains an updated XML parser. See the “Updated XML Parser and Schema
Enforcement” section on page B-1.
Table 5-1 URIs Supported for Release Cisco Unified IP Phone Services SDK (continued)
URI
7905G
7912G
7906G
7911G
7931G 7920G
7921G
7925G
7925G-
EX
7926G 7937G
7940G
7960G
7941G/7941G-GE,
7961G/7961G-GE,
7942G, 7962G,
7945G, 7965G,
IP
Communicator
7970G
7971G-GE
7975G
6921,
6941,
6945
6961
9971,
9951,
8961