Specifications

3-6
Cisco AS5x00 Case Study for Basic IP Modem Services
11/24/1999
Section 3 Commissioning the Cisco AS5800 Hardware
Verifying Basic Setup
1.1 Analyzing the System Boot Dialog
To view the boot sequence through a terminal session, you must have a console connection to the access
server before it powers up.
Caution
Always power up the dial shelf before the router shelf. The DSC card checks the dial
shelf’s inventory, which requires extra time. After two minutes, power up the router shelf.
The router shelf depends on the DSC card for the dial shelf’s inventory report.
The following boot sequence occurs. Event numbers and comments are inserted in the example to
describe the boot sequence.
System Bootstrap, Version 11.1(13)CA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1997 by cisco Systems, Inc.
C7200 processor with 131072 Kbytes of main memory
Self decompressing the image : #################################################
################################################################################
################################################################ [OK]
%PA-2-UNDEFPA: Undefined Port Adaptor type 106 in bay 2
%SYS-4-CONFIG_NEWER: Configurations from version 12.0 may not be correctly under
stood.
%OIR-3-SEATED: Insert/removal failed (slot 2), check card seating
%OIR-3-SEATED: Insert/removal failed (slot 2), check card seatingCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
Read 7314384 bytes from file slot0:c5800-p4-mz.120-4.XL1.bin
Self decompressing the image : #################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
############################ [OK]
1.
In the previous segment, the NAS decompresses the system boot image, tests the NVRAM for
validity, and decompresses the Cisco IOS image.
Sometimes boot images do not support hardware cards. Sample error messages look like this:
%PA-2-UNDEFPA: Undefined Port Adapter
%OIR-3-SEATED: Insert/removal failed
Ignore these messages. However,
do not
ignore error messages that appear after the Cisco IOS
image decompresses.