Specifications

2-6
Cisco AS5x00 Case Study for Basic IP Modem Services
11/24/1999
Section 2 Commissioning the Cisco AS5300 Hardware
Verifying Basic Setup
Primary Rate ISDN software, Version 1.1.
Backplane revision 2
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x30,
Board Hardware Version 1.64, Item Number 800-2544-2,
Board Revision B0, Serial Number 11811596,
PLD/ISP Version 0.0, Manufacture Date 9-Dec-1998.
1 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
96 terminal line(s)
4 Channelized T1/PRI port(s)
128K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)
Configuration register is 0x2102
Table 2-1 describes the significant output fields in the previous example:
1.2 Checking the Initial Running-Config
The Cisco IOS creates an initial running configuration. Inspect the configuration to get familiar with
the default settings.
Router>enable
Router#show running-config
Building configuration...
Current configuration:
!
version 11.3
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
controller T1 0
clock source line primary
!
controller T1 1
clock source line secondary
Table 2-1 Show Version Command Field Descriptions
Field Description
Router uptime is 9 minutes
Watch for unscheduled reloads by inspecting
this field.
System restarted by power-on at
16:59:44 PST Fri Dec 31 1999
Tells you why the access server last reloaded.
If the field displays “power-on,” a power
interruption caused the reload.
System image file is
"flash:c5300-is-mz.113-7.AA"
The Cisco AS5300 booted from this image
location.