Specifications

6-3
Cisco AS5x00 Case Study for Basic IP Modem Services
11/24/1999
Section 6 Modem Management Operations
Managing Modem Firmware
1/13 2 2.6.2.0
1/14 2 2.6.2.0
1/15 2 2.6.2.0
1/16 2 2.6.2.0
1/17 2 2.6.2.0
. . .
Snip

Find the version of firmware that is bundled with the Cisco IOS. The
show modem map
command
displays the region of NVRAM that identifies where the modems get their firmware from at bootup.
The field “IOS-Default” indicates that the modem gets its firmware from the bundled IOS image.
At the end of the display, you see the versions of firmware that the Cisco IOS found and where they
are stored. Bundled firmware is stored in the directory system:/ucode.
The following example shows that MICA portware 2.6.2.0 is mapped to the modems and bundled
with the Cisco IOS software:
5300-NAS#show modem map
Slot 1 has Mica Carrier card.
Modem Firmware Firmware
Module Numbers Rev Filename
0 1/0 - 1/5 2.6.2.0 IOS-Default
1 1/6 - 1/11 2.6.2.0 IOS-Default
2 1/12 - 1/17 2.6.2.0 IOS-Default
3 1/18 - 1/23 2.6.2.0 IOS-Default
4 1/24 - 1/29 2.6.2.0 IOS-Default
5 1/30 - 1/35 2.6.2.0 IOS-Default
6 1/36 - 1/41 2.6.2.0 IOS-Default
7 1/42 - 1/47 2.6.2.0 IOS-Default
Slot 2 has Mica Carrier card.
Modem Firmware Firmware
Module Numbers Rev Filename
0 2/0 - 2/5 2.6.2.0 IOS-Default
1 2/6 - 2/11 2.6.2.0 IOS-Default
2 2/12 - 2/17 2.6.2.0 IOS-Default
3 2/18 - 2/23 2.6.2.0 IOS-Default
4 2/24 - 2/29 2.6.2.0 IOS-Default
5 2/30 - 2/35 2.6.2.0 IOS-Default
6 2/36 - 2/41 2.6.2.0 IOS-Default
7 2/42 - 2/47 2.6.2.0 IOS-Default
Firmware-file Version Firmware-Type
============= ======= =============
system:/ucode/mica_board_firmware 2.0.2.0 Mica Boardware
system:/ucode/mica_port_firmware 2.6.2.0 Mica Portware
system:/ucode/microcom_firmware 5.1.20 Microcom F/W and DSP
5300-NAS#