User`s guide

Chapter 3 Create Connection Wizards
How Do I...
3-26
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
How Do I...
This section contains procedures for tasks that the wizard does not help you
complete.
How Do I View the IOS Commands I Am Sending to the Router?
See How Do I View the IOS Commands I Am Sending to the Router?
How Do I Configure an Unsupported WAN Interface?
SDM does not support configuration of every WAN interface that your router
might support. If SDM discovers an interface in your router that it does not
support, or a supported interface with an unsupported configuration, SDM
displays a radio button labeled Other (Unsupported by SDM). The unsupported
interface is displayed in the Interfaces and Connections window, but it cannot be
configured using SDM.
To configure an unsupported interface, you must use the router command-line
interface (CLI).
How Do I Enable or Disable an Interface?
You can disable an interface without removing its configuration, and you can
reenable an interface that you have disabled.
Step 1 Click Configure on the SDM toolbar.
Step 2 Click Interfaces and Connections in the left frame.
Step 3 Click the interface that you want to disable or enable.
Step 4 If the interface is enabled, the Disable button appears below the Interface List.
Click it to disable the interface. If the interface is currently disabled, the Enable
button appears in that location. Click that button to disable the interface.