User`s guide

Chapter 35 View Menu Commands
Running Config
35-2
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Running Config
Displays the router’s running configuration.
Show Commands
Displays the Show Commands dialog box, which lets you issue Cisco IOS show
commands to the router and view the output. The Show Commands dialog box can
display the output from the following show commands:
• show flash—Shows the contents of the router Flash memory.
• show startup-config—Shows the router startup configuration file.
• show access-lists—Shows all of the Access Control Lists (ACLs) commands
currently configured on the router.
• show diag—Shows information about the hardware installed in the router.
• show interfaces—Shows information about the configuration of each
interface and about the packets transferred over the interface.
• show protocols—Shows information about the network protocols configured
on each interface.
• show version—Shows information about the version of Cisco IOS software
running on the router.
SDM Default Rules
The SDM Default Rules screen displays a list of all of the default rules configured
by SDM. The screen is organized with a tree on the left side of the screen
displaying options for Access Rules, Firewall, VPN - IKE Policy, and
VPN - Transform Sets. To view the default rules for these options, click the option
in the tree, and the default rules for that option are displayed on the right. For more
information about the rules, see the option descriptions that follow.