User`s guide

28-53
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Chapter 28 Public Key Infrastructure
USB Tokens
Maximum PIN Retries
Displays the maximum number of times SDM will attempt to log in to the USB
token with the given PIN. If SDM is unsuccessful after trying for the number
specified, it will stop trying to log in to the USB token.
Removal Timeout
Displays the maximum number of seconds that SDM will continue to use Internet
Key Exchange (IKE) credentials obtained from the USB token after the token is
removed from the router.
If Removal Timeout is empty, the default timeout is used. The default timeout is
triggered when a new attempt to access the IKE credentials is made.
Secondary Config File
Displays the configuration file that SDM attempts to find on the USB token. The
file extension must .cfg.
Add or Edit USB Token
This window allows you to add or edit USB token logins.
Token Name
If you are adding a USB token login, enter the USB token name. The name you
enter must match the name of the token that you want to log in to.
A token name is set by the manufacturer. For example, USB tokens manufactured
by Aladdin Knowledge Systems are named eToken.
You can also use the name “usbtokenx”, where x is the number of the USB port to
which the USB token is connected. For example, a USB token connected to USB
port 0 is named usbtoken0.
If you are editing a USB token login, the Token Name field cannot be changed.