User`s guide

26-27
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Chapter 26 Authentication, Authorization, and Accounting
AAA Servers and Groups
Add or Edit a RADIUS Server
Add or edit information for a RADIUS server in this window.
Server IP or Host
Enter the IP address or the host name of the server. If the router has not been
configured to use a Domain Name Service (DNS) server, enter an IP address.
Authorization Port
Specify the server port to use for authorization requests. The default is 1645.
Accounting Port
Specify the server port to use for accounting requests. The default is 1646.
Timout in seconds
Optional. Enter the number of seconds that the router should attempt to contact
this server before going on to the next server in the group list. If you do not enter
a value, the router will use the value configured in the AAA Servers Global
Settings window.
Configure Key
Optional. Enter the key to use to encrypt traffic between the router and this server.
If you do not enter a value, the router will use the value configured in the AAA
Servers Global Settings window.
New Key/Confirm Key
Enter the key and reenter it for confirmation.
Edit Global Settings
You can specify communication settings that will apply to all communications
between the router and AAA servers in this window. Any communications
settings made for a specific router will override settings made in this window.