User`s guide

22-33
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Chapter 22 Network Admission Control
Edit NAC Tab
Add, Edit, and Delete Buttons
Click the Add button to create a new exception policy. Use the Edit button to
modify existing exception policies, and the Delete button to remove exception
policies. The Edit and Delete buttons are disabled when there are no exception
policies in the list.
EAPoUDP Timeouts
Configure the timeout values the router is to use for EAPoUDP communication
with network hosts. The default, minimum, and maximum values for all settings
are shown in the following table.
Interface List
Select the interface to which the EAPoUDP timeout settings are to apply.
Hold Period Timeout Field
Enter the number of seconds that the router is to ignore packets from clients that
have just failed authentication.
Retransmit Timeout Field
Enter the number of seconds the router is to wait before retransmitting EAPoUDP
messages to clients.
Value Default Minimum Maximum
Hold Period Timeout
180 seconds 60 seconds 86400 seconds
Retransmission Timeout
3 seconds 1 second 60 seconds
Revalidation Timeout
36000 seconds 300 seconds 86400 seconds
Status Query Timeout
300 seconds 30 seconds 1800 seconds