User`s guide

8-71
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Chapter 8 Site-to-Site VPN
How Do I...
Caution Do not apply the mirror configuration to the peer device without
editing! This configuration is a template that requires additional
manual configuration. Use it only as a starting point to build the
configuration for the VPN peer.
Step 6 After saving the file, use a text editor to make any needed changes to the template
configuration. These are some commands that may need editing:
• The peer IP address command(s)
• The transform policy command(s)
• The crypto map IP address command(s)
• The ACL command(s)
• The interface ip address command(s)
Step 7 After you have finished editing the peer configuration file, deliver it to the peer
router using a TFTP server.
How Do I Edit an Existing VPN Tunnel?
To edit an existing VPN tunnel:
Step 1 From the left frame, select VPN.
Step 2 Select Site-to-Site VPN. in the VPN tree, and then click the Edit tab.
Step 3 Click the connection that you want to edit.
Step 4 Click Add.
Step 5 Select Static crypto maps to <policy name>
Step 6 In the Add static crypto maps window, you can add more crypto maps to the VPN
connection.