User`s guide

Chapter 8 Site-to-Site VPN
Edit Site-to-Site VPN
8-58
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Delete Button
Click to delete a selected VPN connection
Test Tunnel.. Button
Click to test a selected VPN tunnel.The results of the test will be shown in another
window.
Clear Connection Button
Click to reset an established connection to a remote peer. This button is disabled
if you have selected a dynamic site-to-site VPN tunnel.
Generate Mirror..Button
Click to create a text file that captures the VPN configuration of the local router
so that a remote router can be given a VPN configuration that enables it to
establish a VPN connection to the local router. This button is disabled if you have
selected a dynamic site-to-site VPN tunnel.
Note Any previously configured VPN connections detected by SDM that do not use
ISAKMP crypto maps will appear as read-only entries in the VPN connection
table and cannot be edited.
Add new connection
Use this window to add a new VPN connection between the local router and a
remote system, referred to as a peer. You create the VPN connection by
associating an IPSec policy with an interface.
To create a VPN connection:
Step 1 Select the interface you want to use for the VPN from the Select Interface list.
Only interfaces that are not used in other VPN connections are shown in this list.