Troubleshooting guide

11-42
Cisco Broadband Local Integrated Services Solution Troubleshooting Guide
OL-5169-01
Chapter 11 Element Management and MIBs
Cisco uBR7246vxr MIBs
docsIfCmtsUcdInterval The interval between CMTS transmission of successive Upstream
Channel Descriptor messages for each upstream channel at this
interface.
docsIfCmtsMaxServiceIds The maximum number of service IDs that may be simultaneously
active.
docsIfCmtsInvitedRanging
Attempts
The maximum number of attempts to make on invitations for
ranging requests. A value of zero means the system should
attempt to range forever.
docsIfCmtsInsertInterval The amount of time to elapse between each broadcast station
maintenance grant. Broadcast station maintenance grants are used
to allow new MTAs to join the network. Zero indicates that a
vendor-specific algorithm is used instead of a fixed time.
Maximum amount of time permitted by the specification is 2
seconds.
docsIfCmtsStatusInvalidRange
Reqs
This object counts invalid RNG-REQ messages received on this
interface.
docsIfCmtsStatusRanging
Aborteds
This object counts ranging attempts that were explicitly aborted
by the CMTS.
docsIfCmtsStatusInvalidRegReqs This object counts invalid REG-REQ messages received on this
interface.
docsIfCmtsStatusFailedRegReqs This object counts failed registration attempts, i.e., authentication
failures and class of service failures, on this interface.
docsIfCmtsStatusInvalidData
Reqs
This object counts invalid data request messages received on this
interface.
docsIfCmtsStatusT5Timeouts This object counts the number of times counter T5 expired on this
interface.
docsIfCmtsCmStatusMacAddress MAC address of this MTA. If the MTA has multiple MAC
addresses, this is the MAC address associated with the Cable
interface.
docsIfCmtsCmStatusIpAddress IP address of this MTA. If the MTA has no IP address assigned,
or the IP address is unknown, this object returns a value of
0.0.0.0. If the MTA has multiple IP addresses, this object returns
the IP address associated with the Cable interface.
docsIfCmtsCmStatusDown
ChannelIfIndex
IfIndex of the downstream channel this CM is connected to. If the
downstream channel is unknown, this object returns a value of
zero.
docsIfCmtsCmStatusUpChannel
IfIndex
IfIndex of the upstream channel this CM is connected to. If the
upstream channel is unknown, this object returns a value of zero.
docsIfCmtsCmStatusRxPower The receive power as perceived for upstream data from this MTA.
If the receive power is unknown, this object returns a value of
zero.
Table 11-4 DOCS-IF-MIB.my Objects (continued)
Object Description