Troubleshooting guide

11-39
Cisco Broadband Local Integrated Services Solution Troubleshooting Guide
OL-5169-01
Chapter 11 Element Management and MIBs
Cisco uBR7246vxr MIBs
docsIfUpChannelTxBackoffStart The initial random backoff window to use when retrying
transmissions. Expressed as a power of 2. A value of 16 at the
CMTS indicates that a proprietary adaptive retry mechanism is to
be used. See the associated conformance object for write
conditions and limitations.
docsIfUpChannelTxBackoffEnd The final random backoff window to use when retrying
transmissions. Expressed as a power of 2. A value of 16 at the
CMTS indicates that a proprietary adaptive retry mechanism is to
be used. See the associated conformance object for write
conditions and limitations.
docsIfQosProfPriority A relative priority assigned to this service when allocating
bandwidth. Zero indicates lowest priority; and seven indicates
highest priority. Interpretation of priority is device-specific.
MUST NOT be changed while this row is active.
docsIfQosProfMaxUpBandwidth The maximum upstream bandwidth, in bits per second, allowed
for a service with this service class. Zero if there is no restriction
of upstream bandwidth. MUST NOT be changed while this row is
active.
docsIfQosProfGuarUpBandwidth Minimum guaranteed upstream bandwidth, in bits per second,
allowed for a service with this service class. MUST NOT be
changed while this row is active.
docsIfQosProfMaxDown
Bandwidth
The maximum downstream bandwidth, in bits per second,
allowed for a service with this service class. Zero if there is no
restriction of downstream bandwidth. MUST NOT be changed
while this row is active.
docsIfQosProfMaxTxBurst The maximum number of mini-slots that may be requested for a
single upstream transmission. A value of zero means there is no
limit. MUST NOT be changed while this row is active.
docsIfQosProfBaselinePrivacy Indicates whether Baseline Privacy is enabled for this service
class. MUST NOT be changed while this row is active.
docsIfQosProfStatus This is object is to used to create or delete rows in this table. This
object MUST NOT be changed from active while the row is
referenced by the any entry in either docsIfCmServiceTable (on
the CM), or the docsIfCmtsServiceTable (on the CMTS).
docsIfSigQIncludesContention Value is true(1) if this CMTS includes contention intervals in the
counters in this table. Always false(2) for CMs.
docsIfSigQUnerroreds Codewords received on this channel without error. This includes
all codewords, whether or not they were part of frames destined
for this device.
docsIfSigQCorrecteds Codewords received on this channel with correctable errors. This
includes all codewords, whether or not they were part of frames
destined for this device.
docsIfSigQUncorrectables Codewords received on this channel with uncorrectable errors.
This includes all codewords, whether or not they were part of
frames destined for this device.
Table 11-4 DOCS-IF-MIB.my Objects (continued)
Object Description