Troubleshooting guide

11-28
Cisco Broadband Local Integrated Services Solution Troubleshooting Guide
OL-5169-01
Chapter 11 Element Management and MIBs
Cisco uBR7246vxr MIBs
docsDevSwAdminStatus If set to upgradeFromMgt(1), the device will initiate a TFTP
software image download using docsDevSwFilename. After
successfully receiving an image, the device will set its state to
ignoreProvisioningUpgrade(3) and reboot. If the download
process is interrupted by a reset or power failure, the device will
load the previous image and, after re-initialization, continue to
attempt loading the image specified in docsDevSwFilename.
If set to allowProvisioningUpgrade(2), the device will use the
software version information supplied by the provisioning server
when next rebooting (this does not cause a reboot).
When set to ignoreProvisioningUpgrade(3), the device will
disregard software image upgrade information from the
provisioning server.
Note that reading this object can return upgradeFromMgt(1). This
indicates that a software download is currently in progress, and
that the device will reboot after successfully receiving an image.
At initial startup, this object has the default value of
allowProvisioningUpgrade(2).
docsDevSwOperStatus InProgress(1) indicates that a TFTP download is underway, either
as a result of a version mismatch at provisioning or as a result of
a upgradeFromMgt request. CompleteFromProvisioning(2)
indicates that the last software upgrade was a result of version
mismatch at provisioning. CompleteFromMgt(3) indicates that
the last software upgrade was a result of setting
docsDevSwAdminStatus to upgradeFromMgt. Failed(4) indicates
that the last attempted download failed, ordinarily due to TFTP
timeout.
docsDevSwCurrentVers The software version currently operating in this device. This
object should be in the syntax used by the individual vendor to
identify software versions. Any CM MUST return a string
descriptive of the current software load. For a CMTS, this object
SHOULD contain either a human readable representation of the
vendor specific designation of the software for the chassis, or of
the software for the control processor. If neither of these is
applicable, this MUST contain an empty string.
Server Access group objects:
Table 11-3 DOCS-CABLE-DEVICE-MIB.my Objects (continued)
Object Description