Troubleshooting guide

10-16
Cisco Broadband Local Integrated Services Solution Troubleshooting Guide
OL-5169-01
Chapter 10 Troubleshooting the Cisco BTS 10200 Softswitch
Troubleshooting
Step 3 To perform test 1 on CAS trunk group 64, enter the following command:
diag cas-trunk-termination test=1; tgn-id=64; cic=1;
You should receive a response similar to the following:
Reply: Diagnostic CAS Trunk Group Menu.
(1) CAS MGCP Connectivity Test
(2) CAS Termination Connection Test
(3) ALL
Test 1 tests MGCP access to the CAS-controlled trunk termination, test 2 determines if there is a path
to the device by pinging it, and test 3 performs both tests 1 and 2.
Step 4 To perform test 1 on CAS trunk group 64, enter the following command:
diag cas-trunk-termination test=1; tgn-id=64; cic=1;
You should receive a response similar to the following example:
TRUNK DIAGNOSTIC TEST EXECUTED -> diag trunk
TG-NUM -> 64
CIC -> 1
TEST-TYPE -> ADM-MGW-MGCP-CONNECTIVITY-TEST
TEST-DURATION -> 0
RESULT -> TEST-SUCCESS
REASON -> PASSED: Reason: AUEP-NACK received with RespCode = 510
Reply: Diagnostic command executed.
Step 5
To perform test 2 on CAS trunk group 64, enter the following command:
diag cas-trunk-termination test=2; tgn-id=64; cic=1;
You should receive a response similar to the following example:
TRUNK DIAGNOSTIC TEST EXECUTED -> diag trunk
TG-NUM -> 64
CIC -> 1
TEST-TYPE -> ADM-TERM-CONNECTION-TEST
TEST-DURATION -> 32
RESULT -> TEST-SUCCESS
REASON -> PASS successfully.
Reply: Diagnostic command executed.
Step 6
To perform test 3 on CAS trunk group 64, enter the following command:
diag cas-trunk-termination test=3; tgn-id=64; cic=1;
You should receive a response similar to the following example:
TRUNK DIAGNOSTIC TEST EXECUTED -> diag trunk
TG-NUM -> 64
CIC -> 1
TEST-TYPE -> ADM-MGW-MGCP-CONNECTIVITY-TEST
TEST-DURATION -> 11
RESULT -> TEST-SUCCESS
REASON -> PASSED: Reason: AUEP-NACK received with RespCode = 510
TRUNK DIAGNOSTIC TEST EXECUTED -> diag trunk
TG-NUM -> 64
CIC -> 1
TEST-TYPE -> ADM-TERM-CONNECTION-TEST
TEST-DURATION -> 32
RESULT -> TEST-SUCCESS
REASON -> PASS successfully.
Reply: Diagnostic command executed.