Troubleshooting guide

9-34
Cisco Broadband Local Integrated Services Solution Troubleshooting Guide
OL-5169-01
Chapter 9 Troubleshooting Cisco Media Gateways
Troubleshooting VISM Cards
VISM and PXM Display, Log, and Diagnostic Loopback Path CLI Commands
You can use the following commands to troubleshoot your VISM card:
• The VISM dspcd command
• The PXM dsplog command
• PXM diagnostic loopback commands
Note Refer to the Cisco MGX 8000 Series platform command reference guides for more information on PXM
commands.
VISM Display Card CLI Command
Use the VISM dspcd command to display the following types of information about your current VISM
card:
• State of the VISM card
• Type of VISM card
• Version number and part numbers
• Daughter card version numbers and part numbers
The following example shows the results of a typical dspcd command:
NODENAME.1.3.VISM8.a > dspcd
ModuleSlotNumber: 17
FunctionModuleState: Active
FunctionModuleType: VISM-8T1
FunctionModuleSerialNum: SAK0331006P
FunctionModuleHWRev: 0.0
FunctionModuleFWRev: 2.0.0_11Nov01_2
FunctionModuleResetReason: ?
LineModuleType: LM-RJ48-8T1
LineModuleState: Present
mibVersionNumber: 21
configChangeTypeBitMap: CardCnfChng, LineCnfChng
pcb part no - (800 level): 800-04399-01
pcb part no - (73 level): 73-03618-01
Fab Part no - (28 level): 28-02791-01
PCB Revision: 08
Daughter Card Information:
Daughter Card Serial Number: SAK0331003P
pcb part no - (73 level): 73-03722-01
Fab Part no - (28 level): 28-02905-01
PCB Revision: 04