Troubleshooting guide
9-12
Cisco Broadband Local Integrated Services Solution Troubleshooting Guide
OL-5169-01
Chapter 9 Troubleshooting Cisco Media Gateways
Troubleshooting Alarms
RPM-PR Card Controls
Table 9-4 shows the LEDs available on the front of the RPM-PR card and describes these LEDs.
Table 9-3 LED Indicators for AXSM Card
LED Color Description
Active Green Card is active.
Standby Yellow Card is in standby mode.
Fail Red Failure detected on card.
Line Green The line is active and there are no alarms.
Red The line is active, but a local alarm has been detected.
Yellow The line is active, and a remote alarm has been detected.
Table 9-4 LED Indicators for RPM-PR Card
RPM-PR Card LED Color Description
CPU OK Green CPU is running.
Yellow
Off CPU is not running.
CB TX On Transmitting cells on cellbus.
Off Not transmitting cells on cellbus.
CB RX On Receiving cells from cellbus.
Off Not receiving cells from cellbus.
LM1 On Port adapter installed and enabled in bay 1.
Off No port adapter installed in bay 1.
LM1 On Port adapter installed and enabled in bay 2.
Off No port adapter installed in bay 2.
CPU OK
CB TX
CB RX
LMI OK
LM2 OK
RPM
AUX
CONSOLE
18011