Troubleshooting guide

1-5
Cisco Broadband Local Integrated Services Solution Troubleshooting Guide
OL-5169-01
Chapter 1 Solution Overview
Architectural Overview
Management Features
Remote software upgrades/management/control
Non-service affecting upgrades (Call Agent)
CORBA
Support the registering of devices and pushing of device configurations via a provisioning API
Support assignment of proper IP addresses to CPE equipment based on type (via DHCP)
Support web-based GUI provisioning for the Cisco BTS10200 Call Agent
Backbone Connectivity Features
Packet over SONET (POS)
Trunking Gateway Features
TGW allows gain control (padding) to be provisioned
Detection of Loss of Connection
Loopback COT
Transponder COT
Solution Assumptions
The following assumptions apply to the Cisco BLISS for Cable Release 1.5 software:
It is a secondary line solution
3-way Calling is not supported
BLV/OI is not a requirement
Only the G.711 CODEC is supported
Complete compliance with the PacketCable Security requirements is not required
Network management for BLISS is provided by the Cisco NMS/OSS for Broadband Services
solution
Specifications Supported
The following PacketCable specifications are supported in Cisco BLISS for Cable Release 1.5:
DOCSIS Baseline Privacy Plus Interface Specification, SP-BPI+-I08-020301
PacketCable™ Network-based Call Signaling (NCS) Protocol Specification
(PKT-SP-EC-MGCP-I04-011221)
PacketCable™ PSTN Gateway Call Signaling Protocol Specification, PKT-SP-TGCP-I02-011221
PacketCable™ Security Specification, PKT-SP-SEC-I05-020116
PacketCable™ Electronic Surveillance Specification (CALEA Support PKT-SP-ESP-I01-991229)
PacketCable™ Dynamic Quality of Service (DQoS) Specification (PKT-SP-DQOS-I03-020116)
PacketCable™ Event Message Specification (PKT-EM-I03-011221)
PacketCable™ MTA Device Provisioning Specification (PKT-SP-PROV-I03-011221)
PacketCable™ CMS to CMS Signaling Specification, PKT-SP-CMSS-I01-001128.
PacketCable™ Audio/Video Codecs Specification, PKT-SP-CODEC-I03-011221