Troubleshooting guide

3-32
Cisco Broadband Local Integrated Services Solution Troubleshooting Guide
OL-5169-01
Chapter 3 Trouble Isolation Procedures
Component States
Unequip Command
The unequip command changes the administrative state of terminations that are in the OOS state into the
UEQP state. It ignores the terminations in the INS, MAINT, or UEQP states.
Use the following example to unequip terminations:
CLI> unequip trunk-termination tgn-id=13; cic=all;
Reply : Success: CLI change successful
TGN ID -> 13
REASON -> ADM executed successful
RESULT -> ADM configure result in success
CIC START -> 1
CIC END -> 24