Troubleshooting guide

3-21
Cisco Broadband Local Integrated Services Solution Troubleshooting Guide
OL-5169-01
Chapter 3 Trouble Isolation Procedures
Component States
Status Command
The following example shows the status of a single TG ID:
CLI> status trunk-grp id=2;
RESULT -> ADM configure result in success
REASON -> ADM executed successful
ADMIN STATE -> ADMIN_INS
OPER STATE -> Trunk group in-service
TGN ID -> 2
Table 3-4 lists the administrative states the system can return.
The system can return the following operating states:
Trunk group in-service
Trunk group out-of-service
Trunk group manually busy
Trunk group operate in wait state
Trunk group operate in standby state
Trunk group restore session request normal
Trunk group restore session request switch-over
Trunk group restore session request maintenance
Trunk group restore session fail normal
Trunk group restore session fail switch-over
Trunk group restore session fail maintenance
Trunk group restore establish request normal
Trunk group restore establish request switch-over
Table 3-4 Example Returnable Administrative States
State Definition
ADMIN-INS In Service.
ADMIN-OOS Out of Service.
ADMIN-MAINT Maintenance Mode.
ADMIN-OOS-Pending Transitioning to Out of Service.
ADMIN-MAINT-Pending Transitioning to Maintenance Mode.
ACL Congestion is at level 1
ACL Congestion is at level 2
ACL Congestion is at level 3
TFC Congestion is at level 1
TFC Congestion is at level 2
TFC Congestion is at level 3