Specifications

2-33
Cisco Global Site Selector Administration Guide
OL-5480-01
Chapter 2 Managing the GSS from the CLI
Replacing GSS Devices in Your GSS Network
4. Enter the gss enable command to enable your GSS device as a GSS and direct
it to the primary GSSM in your GSS network. Specify either the domain name
or the network address of the primary GSSM.
The syntax for this command is:
gss enable gss primary_GSSM_hostname | primary_GSSM_IP_address
The variables are:
– primary_GSSM_hostname—The DNS hostname of the device currently
serving as the primary GSSM
– primary_GSSM_IP_address—The DNS hostname of the device currently
serving as the primary GSSM
For example, to enable gss3.example.com as a GSS and direct it to the
primary GSSM, gssm1.example.com, enter:
gss3.example.com# gss enable gss gssm1.example.com
Save your configuration changes to memory.
gss3.example.com# copy running-config startup-config
5. Activate the GSS from the primary GSSM GUI to add it to your GSS network.
Refer to the
“Activating GSS Devices from the Primary GSSM” section in
Chapter 1, Managing GSS Devices from the GUI.
You can now use the replacement GSS in your GSS network.