Specifications

2-19

Cisco Global Site Selector Administration Guide

OL-5480-01

Chapter 2 Managing the GSS from the CLI

Stopping the GSS Software

Stop the GSS software before you:

• Upgrade GSS software

• Perform a warm reboot

• Restore GSS factory defaults

• Disable an active GSS device

• Perform GSS maintenance or troubleshooting

Use the gss stop command to stop the GSS software. For example, enter:

gssm1.example.com# gss stop

The following message appears when you stop the GSS software from the CLI.

Server is Shutting Down

Use the gss start command to restart the GSS software on the selected device after

it has been stopped. For example, enter:

gssm1.example.com# gss start

Shutting Down the GSS Software

If you intend to power down a GSS device, Cisco Systems recommends that you

use the shutdown command to first shutdown the GSS software. You should also

shutdown the GSS software prior to disabling a GSS (see the

“Disabling the GSS

Software” section).

To shut down the GSS software, enter:

gssm1.example.com# shutdown