Specifications

Chapter 2 Managing the GSS from the CLI
Configuring Terminal Screen Line Length
2-16
Cisco Global Site Selector Administration Guide
OL-5480-01
Configuring Terminal Screen Line Length
You can specify the number of screen lines to display on your terminal by using
the terminal length command. The maximum number of displayed screen lines
is 512. The default is 23 screen lines. When the terminal length command is set
to a value of 0, the GSS sends all of its data to the screen at once without pausing
to buffer the data. To restore the default terminal length of 23 lines, use the no
form of this command.
The syntax for this command is:
terminal-length number
The number variable specifies the number of screen lines to display on your
terminal, from 0 and 512. The default is 23 lines.
For example, to set the number of screen lines to 35, enter:
gssm1.example.com(config)# terminal-length 35
To reset the number of screen lines to the default of 23, enter:
gssm1.example.com(config)# no terminal-length
To display the terminal length setting for your GSS device, use the show
terminal-length command.
For example:
gssm1.example.com# show terminal-length
terminal length 35