Specifications

1-7
Cisco Global Site Selector Administration Guide
OL-5480-01
Chapter 1 Managing GSS Devices from the GUI
Activating and Modifying GSS Devices
Note The device status remains as “Inactive” if the device is not functioning
properly or there are problems with network connectivity. If this occurs,
cycle power to the GSS device and check your network connections, then
repeat this procedure. If you still cannot activate the GSS device, contact
Cisco TAC.
Figure 1-4 Global Site Selectors List Page - Active Status
6. Repeat Steps 1 through 5 for each inactive GSS or standby GSSM.