Specifications

Chapter 8 Viewing Log Files
Viewing System Logs from the Primary GSSM GUI
8-12
Cisco Global Site Selector Administration Guide
OL-5480-01
To rotate existing log files:
gssm1.example.com# rotate-logs
To clear all rotated log files in the $STATE directory and subdirectories, except
for the active log files:
gssm1.example.com# rotate-logs delete-rotated-logs
Viewing System Logs from the Primary GSSM GUI
From the primary GSSM GUI, you can view messages logged in the GSS
system.log file. The system.log file presents the logged information of interest to
GSS administrators, such as the severity of the message, a brief description of the
problem, and any relevant conditions encountered while the message was logged.
The system.log file, however, presents only a subset of all logged information. For
information about viewing the entire contents of the individual GSS log
file, see
the
“Viewing System Message Logging” section.
This section includes the following procedures:
• Viewing System Logs from the Primary GSSM GUI
• Purging System Log Messages from the GUI
• Common System Log Messages
Viewing System Logs from the Primary GSSM GUI
To view the GSS system logs:
1. From the primary GSSM GUI, click the Tools tab.
2. Click the System Logs option. The System Log list page appears (Figure 8-1)
displaying system log information.