Specifications

5-11
Cisco Global Site Selector Administration Guide
OL-5480-01
Chapter 5 Configuring Access Lists and Filtering GSS Traffic
Deploying GSS Devices Behind Firewalls
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spts:3002:3008
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5002
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:1974 dpt:1974
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5001
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:5001
ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0
DROP all -- 0.0.0.0/0 0.0.0.0/0
Use the show access-group command to display a list of the access lists
associated with GSS interfaces Ethernet 0 and Ethernet 1.
gss1.example.com(config)#show access-group
access group acl_1 interface eth0
Deploying GSS Devices Behind Firewalls
This section describes how to configure your GSS for deployment behind a
firewall. It contains the following sections:
• GSS Firewall Deployment Overview
• Configuring GSS Devices Behind a Firewall