Specifications

1036
Cross-Platform Release Notes for Cisco IOS Release 12.0S
OL-1617-14 Rev. Q0
Resolved Caveats—Cisco IOS Release 12.0(29)S
snmp-server community public1 view NOMEMPOOL ro 6
snmp-server community public2 view NOMEMPOOL ro 7
snmp-server community public3 view NOMEMPOOL ro 8
The specific MIB that is being blocked is the ciscoEnhancedMemPoolMIB MIB
(1.3.6.1.4.1.9.9.221).
Once the configuration is in place, the router must be reloaded to clear the IPC cache and free the
memory.
• CSCee60844
Symptoms: A software-forced crash may occur on a Cisco 7500 series.
Conditions: This symptom is observed on a Cisco 7500 series with a PA-T3 or PA-2T3 configured
for class-based weighted fair queueing (CBWFQ).
Workaround: Remove CBWFQ from the interface or policy map.
• CSCee63808
Symptoms: A router reloads when you enter the show monitor event-trace merged-list component
command and you use a long string for the component argument.
Conditions: This symptom is observed on a Cisco 7200 and Cisco 7500 series that run Cisco IOS
Release 12.2 S.
Workarounds: Enter a short string for the component argument.
• CSCin72727
This caveat consists of two symptoms, two conditions, and two workarounds:
1. Symptom 1: The ifOperStatus SNMP object may return “Testing” when the CLI states Up/Up
(Looped).
Condition 1: This symptom is observed when PPP encapsulation and loopback are configured.
Workaround 1: There is no workaround.
2. Symptom 2: The ifOperStatus SNMP object may return “DOWN.”
Condition 2: This symptom is observed when HDLC encapsulation and the down-when-looped
command are configured.
Workaround 2: There is no workaround.
EXEC and Configuration Parser
• CSCed51952
Symptoms: A Cisco router may crash when you perform and online insertion removal (OIR) of a
line card.
Conditions: This symptom is observed when an interface on the line card is being configured
through the CLI while the OIR of the line card removes the interface.
Workaround: There is no workaround.
• CSCee64504
Symptoms: A CPUHOG may occur for about 4.5 seconds when you enter the show running-config
command.
Conditions: This symptom is observed on a Cisco uBR10000 series but may also occur on other
platforms.