Installation guide

15
Cisco 6160 Quad-Port Flexi ATU-C to Octal-Port DMT ATU-C Line Card Conversion Procedures
OL-0992-01
Port Mapping of Subscriber Connectors to Slots and Ports
Port Mapping of Subscriber Connectors to Slots and Ports
The subscriber connectors are numbered JC1 to JC11. Table 5 shows how subscriber connectors
correspond to card slots and ports. In the table, an asterisk (*) indicates a port that is not available on
quad-port xTU-C line cards.
Table 5 Port Mapping for the Cisco 6160 Subscriber Connectors
Slot/Line
Champ Pins
Cisco 6160 Connector Slot/Line
Champ Pins
Cisco 6160 ConnectorTip Ring Tip Ring
1/1 1 26 JC1
Slots 1 through 3
4/1 1 26 J2
Slots 4 through 6
1/2 2 27 4/2 2 27
1/3 3 28 4/3 3 28
1/4 4 29 4/4 4 29
1/5* 5 30 4/5* 5 30
1/6* 6 31 4/6* 6 31
1/7* 7 32 4/7* 7 32
1/8* 8 33 4/8* 8 33
2/1 9 34 5/1 9 34
2/2 10 35 5/2 10 35
2/3 11 36 5/3 11 36
2/4 12 37 5/4 12 37
2/5* 13 38 5/5* 13 38
2/6* 14 39 5/6* 14 39
2/7* 15 40 5/7* 15 40
2/8* 16 41 5/8* 16 41
3/1 17 42 6/1 17 42
3/2 18 43 6/2 18 43
3/3 19 44 6/3 19 44
3/4 20 45 6/4 20 45
3/5* 21 46 6/5* 21 46
3/6* 22 47 6/6* 22 47
3/7* 23 48 6/7* 23 48
3/8* 24 49 6/8* 24 49