Installation guide

5
Specifications
OL-2189-01
Introduction
Specifications
Table 3 lists the specifications for the commercial and the outside-plant versions of the 8xDMT.
Table 3 8xDMT Specifications
Specification Description
Standards supported • ANSI T1.413, Category 1 only
• ANSI T1.413, Annex F (Reduced NEXT)\
• Universal Test & Operations PHY for ATM, Level 2; A
standard for transport of ATM cells over a 16-bit
parallel data bus. Refer to the ATM Forum document
af-phy-0039.000.
• ITU G.992.1, Annex A (G.dmt)
• ITU G.992.2. (G.lite)
• ITU G.994.1. (G.hs)
External interfaces 8 (no connectors on card)
Data rates (per port) Upstream: Up to 1024 kbps
Downstream: Up to 8.064 Mbps
Internal hardware • 40 MHz Motorola MPC850 microprocessor
• 8MB SDRAM
• 1 Mb boot flash
• 1 kb serial EEPROM
Dimensions Height: 6.07 in. (15.42 cm)
Depth: 8.50 in. (21.59 cm)
Width: 0.88 in. (2.24 cm)
Weight 0.875 lb (0.4 kg)
Power consumption 24W
Minimum software and
network management
requirement
Commercial version:
• Cisco IOS—Release 12.1(6)DA
• CDM
1
—Release 3.3(2) (optional)
Outside-plant version:
• Cisco IOS—Release 12.2(5)DA
• CDM—Release 3.4 (optional)
1. CDM = Cisco DSL Manager