User`s manual

User’s Manual of ISW-1022M Series and ISW-1033MT
61
5.4.5.3 System Event Log—Event Configuration
Having ticked the
Syslog
/
SMTP
checkboxes, the event log/email alert will be sent to the system log server and the SMTP
server respectively. Also, Port event log/alert (link up, link down, and both) can be sent to the system log server/SMTP
server respectively by setting the trigger condition.
Figure 5-13 Event Configuration interface
The page includes the following fields:
Object Description
System event selection:
There are 4 event types—Device Cold Start, Device Warm Start, Authentication
Failure, and X-ring Topology Change. The checkboxes are not available for
ticking unless the Syslog Client Mode on the Syslog Configuration tab and the
E-mail Alert on the SMTP Configuration tab are enabled first.
 Device cold start: When the device executes cold start action, the system
will issue the event log/email alert to the system log/SMTP server
respectively.