User`s manual

User’s Manual of ISW-1022M Series and ISW-1033MT
27
On Power 1 is active.
PWR1 Green
Off Power 1 is inactive.
On Power 2 is active.
PWR2 Green
Off Power 2 is inactive.
On Power or port failure.
FAULT Red
Off No failure.
 10/100Base-TX Ports – Port-1 to Port-6 and Port-8
LED Color Status Meaning
On A network device is detected.
Blinking
The port is transmitting or receiving packets from the TX
device.
Green
Off No device attached.
On The port is operating in full-duplex mode.
Blinking Collision of Packets occurs.
Port-1 ~ 6 &
Port-8
Amber
Off The port is in half-duplex mode or no device is attached.
 10/100/1000Base-T / SFP combo interface - Port-7, Port-9 and Port-10
LED Color Status Meaning
On
A network device is detected.
Blinking
The port is transmitting or receiving packets from the TX
device.
Green
(Upper LED)
Off
No device attached
On
1000M
Port 7, Port 9,
Port 10
(RJ-45)
Green
(Lower LED)
Off
10/100M
On
The SFP port is linking
Blinking
The port is transmitting or receiving packets from the TX
device.
Link/Active
(P7, P9, P10
SFP)
Green
Off
No device attached