Installation guide

18 Cisco Small Business NSS322 Smart Storage
The server name can be a maximum length of 14 characters, which
supports alphanumeric characters (a-z, 0-9) and hyphens (-). It is
required that the server name begin with a letter versus a number.
The server name does not accept names with a space or period (.)
STEP17 Click Next. You are redirected to a window where you can change
the administrator password.
NOTE The default administrator username is admin. The default
administrator password is admin.
STEP18 Change the administrator password by entering the new
password in the Password field. To verify the password, re-enter it
in the Verify Password field.
STEP19 Click Next. You are redirected to a window where you can enter
the date, time, and time zone for the server.
STEP20 Enter the date, time, and time zone for this server. The options are:
•Time Zone—Select a time zone from the drop-down menu.
•Date/Time—Select the current date and time from the drop-
down menus.
• Synchronize with an Internet time server automatically—To
obtain time automatically from an NTP server, click this check
box.
•Server—From the drop-down list, select the NTP server name
and click TEST to verify status.
For example:
- time-a.timefreq.bldrdoc.gov (default)
- time-b.timefreq.bldrdoc.gov
- time-c.timefreq.bldrdoc.gov
• Set the server time the same as your computer time—To
synchronize the server time/clock with the time/clock on your
computer, click this check box.
STEP21 Click Next. You are redirected to a window where you can enter
the IP address, subnet mask, and default gateway for the device.
STEP22 Enter the IP address, subnet mask, and default gateway for this
server. You can either acquire the IP address automatically from a
DHCP server or choose to configure a static IP address.
• Obtain TCP/IP settings automatically via DHCP—Click this
check box to acquire the IP address from a DHCP server. This is
enabled by default.