Installation guide

Cisco Small Business NSS322 Smart Storage 17
STEP 1 Insert the product CD.
STEP 2 Double-click the CD icon on the desktop to view the contents in
Finder.
STEP 3 From the …\MAC\ folder, double-click CISCO_NSSCD_V....dmg.
STEP 4 From the ..\AutoRun\ folder, double-click AutoRun to launch the
Setup Wizard.
STEP 5 Under First Time Installation, click Start. The End-User License
Agreement window opens.
STEP 6 To accept the End-User License Agreement, check the I accept
this agreement check box and click Next. The First Time
Installation Wizard window opens.
STEP 7 Click Next to run the wizard.
STEP 8 From the Hardware Installation Guide window, select your model.
STEP 9 Follow the prompts to check the package contents, install the disk
drives, and connect the equipment.
NOTE If you have already installed the disk drives and connected
the equipment, click Skip until you reach the System Configuration
window.
STEP10 From the System Configuration window, click Next to go to NAS
configuration. The NAS Configuration window opens.
STEP11 Click Next. The Discovering the NAS window opens and advises
when the uninitialized device is found.
NOTE If your device is already configured, click Skip to go to Map
Network Drive. See Mapping a Network Drive, page 21.
STEP12 Click Next. The Web Configuration window opens.
STEP13 The First Time Installation Wizard detects the NAS and prompts
you to go through the web configuration process. From the drop-
down list, select a NAS device.
STEP14 Click Next to continue. You are directed to a configuration window
to complete the settings step by step. The Welcome window
displays.
STEP15 Click Next. You are redirected to a window where you can enter
the name for this server.
STEP16 In the Server Name field, enter a name to identify the NAS device.