Specifications

26 Network Processing Engine Replacement Instructions
Removing and Replacing the Network Processing Engine
Figure 16 Cisco uBR7200 Series Network Processing Engine Captive Screws and
Handle (Cisco uBR7246 Shown)
Step 8
Place the network processing engine on an antistatic surface with its printed circuit board
components facing upward, or in a static shielding bag. If you are returning the network
processing engine to the factory, immediately place it in a static shielding bag.
This completes the procedure for removing an installed network processing engine.
H11514
Handle
Network
processing
engine
Captive installation screws