Specifications

1-3
Cisco 7200 VXR Installation and Configuration Guide
78-5469-04 B0
Chapter 1 Cisco 7200 VXR Product Overview
Physical Description
Dimensions
(H x W x D)
5.25 in. x 16.8 in. x 17 in. (13.34 cm x 42.67 cm x 43.18 cm)
Weight Chassis fully configured with a network processing engine or network services engine, I/O
controller, maximum number of port adapters, 2 power supplies, and a fan tray: ~ 50 lb (22.7 kg)
Heat dissipation 370W (1262 BTU
2
)
AC-input voltage rating 100–240 VAC
3
wide input with power factor correction
AC-input current rating 5A
4
at 100–240 VAC with the chassis fully configured
AC-input frequency rating 50/60 Hz
5
AC-input cable 18 AWG
6
three-wire cable, with a three-lead IEC-320 receptacle on the power supply end, and
a country-dependent plug on the power source end
DC-output power 280W maximum (with either a single or dual power supply configuration)
DC-input voltage rating –48 VDC
7
nominal in North America
–60 VDC nominal in the European Community
DC-input current rating 13A at –48 VDC (370W/–48 VDC = 7.7A typical draw)
8A at –60 VDC (370W/–60 VDC = 6.2A typical draw)
DC-input cable In accordance with local and national wiring regulations
Chassis fan noise
levels—single speed fan
Tested:
• Front (I/O controller and port adapter side) 44.2 dB
• Back (power supply side) 43.7 dB
• Left (fan side) 47.2 dB
• Right 44.8 dB
Maximum: 65 dBa
Airflow ~80 cfm
8
Temperature 32 to 104 F (0 to 40 C) operating; –4 to 149 F (–20 to 65 C) nonoperating
Humidity 10 to 90% noncondensing
Recommended minimum
software requirements
Cisco IOS Release 12.0(2)XE2 or later releases of 12.0 XE
Cisco IOS Release 12.1(1)E or later releases of 12.1 E
Cisco IOS Release 12.0(5)S or later releases of 12.0 S
Cisco IOS Release 12.0(3)T or later releases of 12.0 T
Cisco IOS Release 12.2(1) or later releases of 12.2
Cisco IOS Release 12.2 (4)B or later releases of 12.2 B(
Compliance CE Marking
Table 1-1 Cisco 7200 VXR Physical Specifications (continued)
Description Specification