Datasheet
Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 8 of 10
Table 7. Platform Support
Cisco EtherSwitch
Service Module
Cisco 2600 Series Cisco 2800 Series Cisco 3700
Series
Cisco 3800 Series
NME-16ES-1G 2691 only 2811, 2821, and 2851
only
Yes Yes
NME-16ES-1G-P 2691 only 2811, 2821, and 2851
only
Yes Yes
NME-X-23ES-1G No 2821 and 2851 only No Yes
NME-X-23ES-1G-P No 2821 and 2851 only No Yes
NME-XD-24ES-1S-P
2
No 2851 only No Yes
NME-XD-48ES-2S-P No 2851 only No Yes
Table 8. PoE Support by Platform
Cisco EtherSwitch
Service Module
Cisco 2600
Series
Cisco 2800 Series Cisco 3700
Series
Cisco 3800 Series
NME-16ES-1G NME-16ES-1G does not support PoE
NME-16ES-1G-P No PoE
available
3
Cisco pre-standard and
802.3af PoE support
4
Cisco pre-
standard PoE
only
Cisco pre-standard
and 802.3af PoE
support
NME-X-23ES-1G NME-X-23ES-1G does not support PoE
NME-X-23ES-1G-P Not supported Cisco pre-standard and
802.3af PoE support
Not supported Cisco pre-standard
and 802.3af PoE
support
NME-XD-24ES-1S-P Not supported Cisco pre-standard and
802.3af PoE support
Not supported Cisco pre-standard
and 802.3af PoE
support
NME-XD-48ES-2S-P Not supported Cisco pre-standard and
802.3af PoE support
Not supported Cisco pre-standard
and 802.3af PoE
support
Table 9. Maximum PoE Delivery by Platform with Cisco EtherSwitch Service Module
Router Maximum PoE Delivery
Cisco 2691* No PoE available
Cisco 3725**,*** 360W
Cisco 3745**,*** 360W
Cisco 2811** 160W
Cisco 2821** 240W
Cisco 2851** 360W
Cisco 3825** 360W
Cisco 3845** 360W
* NME-16ES-1G-P is supported on the Cisco 2691, but no PoE support is available.
** Requires upgrading the router's internal power supply to an AC-IP version.
*** Cisco 3725 and 3745 routers only support Cisco pre-standard PoE; they do not support IEEE802.3af
2
Only one Cisco EtherSwitch service module per chassis is supported if NME-XD-24ES-1S-P is used,
otherwise up to two Cisco EtherSwitch service modules are supported per chassis where network module slot
density allows.
3
NME-16ES-1G-P is supported on the Cisco 2691, but no PoE support is available.
4
Requires upgrading the router's internal power supply to an AC-IP version.
4 4
4
4
4
4
4
4










