Datasheet

Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 11
The Cisco 16- and 36-port EtherSwitch modules are available with optional Cisco pre-standard
Power over Ethernet and Gigabit Ethernet support. EtherSwitch bundles are available with these
options pre-installed for easy ordering. The integrated power over ethenet supports Cisco IP
phones and Cisco Aironet wireless access points. An external power supply is needed for this
feature in Cisco 2600/3600 platforms. An Internal power supply option is available on the Cisco
2800
1
, 3700, and 3800
1
Series. For 802.3af power over Ethernet support one of the newer
EtherSwitch Service Modules (NME-16ES-1G-P, NME-23ES-1G-P, or NME-XD-48ES-2S-P)
or one of the EtherSwitch HWICs (HWIC-4ESW-POE or HWIC-D-9ESW-POE) are recommended.
Figure 2. Cisco 3725 and 3745 Series Platforms with EtherSwitch Modules
Cisco EtherSwitch Module Summary
●
NM-16ESW: One 16-port 10/100 EtherSwitch Network Module
●
NM-16ESW-PWR
2
: One 16-port 10/100 EtherSwitch NM with Cisco pre-standard
PoE support
●
NM-16ESW-1GIG: One 16-port 10/100 EtherSwitch NM with 1 GE (1000BaseT) port
●
NM-16ESW-PWR-1GIG
2
: One 16-port 10/100 EtherSwitch NM with Cisco pre-standard
PoE and GE
●
NMD-36-ESW: One 36-port 10/100 EtherSwitch High Density Service Module
●
NMD-36-ESW-PWR
3
: One 36-port 10/100 EtherSwitch HDSM with Cisco pre-standard PoE
●
NMD-36-ESW-2GIG: One 36-port 10/100 EtherSwitch HDSM with 2 GE (1000BaseT)
●
NMD-36-ESW-PWR-2G
3
: One 36-port 10/100 EtherSwitch HDSM + Cisco pre-standard
PoE and 2GE
1
The external power supply option cannot be used with the Cisco 2800 or 3800 Series. An upgrade to the
internal power supply is required to provide power over Ethernet in these routers.
2
This 16-port version should be ordered only if you require Cisco pre-standard Power over Ethernet (POE).
To take advantage of this capability be sure to have or order an external power unit to support Power over
Ethernet (POE) for the Cisco 2600 and 3600 or be sure to order the internal power supply upgrade when
using the EtherSwitch Network module in combination with the Cisco 2800, 3700,and 3800 Series.
3
This 36-port version should be ordered only if you require Cisco pre-standard Power over Ethernet (POE).
To take advantage of this capability be sure to have or order an external power unit to support Power over
Ethernet (POE) for the Cisco 3660 or be sure to order the internal power supply upgrade when using the
EtherSwitch Network module in combination with the Cisco 2851, 3700,and 3800 Series.